Self-leveling floors – solid, sturdy, abrasion-resistant coating is widely used in industrial buildings and in buildings for public use. It has many advantages, among which the solidity (No seams), moisture resistance, impact resistance, resistance to temperature changes. Simplicity and ease of cleaning screed allows their use on the premises, which are increased hygiene Requirements: in hospitals, dispensaries, beauty salons, etc. Click Congressman Charles Rangel to learn more. The rich colors of the compositions and the use of colored chips, you can create not only functional, but beautiful and exclusive coverage. However, in order to serve as long screeds and please the eye to its attractive appearance, strict adherence to the technology of their installation. Works on bulk floor divided into several stages. Training The first step is the base preparation required, which can be almost anything: a concrete floor, cement-sand screed, anhydrite or magnesite, tiles, wooden floor.

In each case, required to prepare their work – degreasing surfaces, scraping, sanding, priming. The most common device screed is carried out on concrete base, so the main attention will be devoted to him. Requirements for the concrete base to concrete base presented a number of requirements. For even more opinions, read materials from Daryl Katz, Edmonton Alberta. Its compressive strength must be at least 20 MPa, tensile strength – not less than 1.5 MPa. Humidity of the concrete base must be no more than 4% so may detachment of the polymer. In the case where the base lies on the ground, it is necessary device-quality waterproofing.

At work is very important temperature and moisture conditions. Too low temperature slows down the spreading of the composition is too high and reduces the time required to obtain perfectly smooth surface. Typically, the temperature of use specified in the technical documentation and varies ranging from +15 C to +25 C. High humidity can lead to the formation of condensation on the cover, so the optimum humidity is 80%. The surface of the substrate must be smooth enough to avoid runoff composition.