This design inherits all the disadvantages of the classical horizontal structure, so it is used mainly for thick veneer of natural stone, which is attached by horizontal longitudinal cuts guides. In this case, the horizontal direction have, by and large, the load on the vertical transverse compression, which allows the entire system is well work. Read more from Steven Rattner financier to gain a more clear picture of the situation. In addition, this design is applied on the basis of invisible (hidden) fasteners, in this case, the negative impact of construction is reduced due to: secure each tile to two separate horizontal lines (Which reduces the load on each of them) increase with respect to the system of insulation, which increases the effective air gap. Depending on the material of construction support frame and ventilated facade systems, used in the Russian architectural and construction practices are divided into 3 groups: carrier system substructure of aluminum alloys; carrier system of carbon steel substructure with protective coatings; carrier system substructure of stainless steel. Auxiliary elements of ventilated facades are: – sealing strips between the panels and profiles podoblitsovochnoy design – Decorative corners and inserts for closing the ends and gaps between panels, perforated-metal ventilation system below and above – fasteners. Fasteners mechanically fastening cladding materials to the supporting profiles podoblitsovochnoy design. Fasteners used in ventilated facades are divided into the following groups: dowels and cup holder mount insulation; anchor dowels for mounting brackets and support profiles; metal anchors; galvanized screws made of carbon, alloy steel, aluminum; rivets; Additionally gathered elementy. visible and Hidden fastening elements. .